GM MDI tech 3 interface come with EVG7 Tablet and GM gds 2 software

Wifi GM MDI scanner come With EVG7 Tablet PC can diagnose GM vehicles directly and easily. complete set GM MDI come with EVG7 Tablet PC installed GM mdi gds tech 2 win software. Wifi GM GDS 2 release date few month ago from our website.

Wifi GM MDI EVG7 Tablet PC installed GM MDI Global TIS MDI GDS2
From vipprogrammer.com
 

Wifi GM MDI Diagnostic & Rerogramming can support the online programming function. Wifi gm mdi tech 3 Diagnostic & Rerogramming insatlled EVG7 Tablet P with GM MDI Global TIS software also comes with GM MDI Global TIS 32B installed that can work for GM, for SAAB, for OPEL, for Holden, for GMC, for Daewoo, for Chevrolet, for Buick and for Cadillac.

EVG7 DL46 Diagnostic Controller Tablet PC:

This EVG7 DL46 tablet PC is designed especially only for the professional garage and mechanic car repair services.

The key feature of this PC is to be full-compatible for vehicle diagnostic devices software.

This tough and rugged tablet PC is designed to use especially in the environment of vehicle repairing garage services.

We installed and tested all kind of automotive, truck and bus diagnostic software, MDI Tech 3 Global TIS, GDS 2, Tech2Win Diagnosis software installed 2.5' SATA HDD, MDI Tech 3 is Vauxhall / Opel OEM Level Diagnostics tool, which when combined with Global TIS, GDS 2, Tech2Win diagnosis software

You can install and run all diagnostic softwares without any alert and error.

china clone Ktag 7.003 ecu programmer with 2.13 KTM100 software

China Ktag ecu programming tool with V2.13 KTM100 software new release. Customers well see that on vipprogrammer.com online shop, we have many firmware version ktag ecu programmer choose, first one is  Ktag KTM100 2.13 with ktag firmware 7.003, and other is ktag 2.13 with ktag firmware V6.070. Which Ktag 2.13 choose: Ktag KTM100 2.13 or ktag firmware V6.070.

Ktag 2.13 Ktag firmware V7.003 Ktag KTM100 V2.13 No tokens limit
 
Ktag china Ktag 2.13 with ktag firmware V6.070 Unlimited tokens
 
Ktag 2.13 KTM100 VS ktag 2.13 ktag firmware 6.070

K-tag ECU programmer Version:

Software: K-suite 2.13 VS  KTM100 2.13, New Ktag KTM100 software, much better than ordinary Ksuite software.

Firmware: Ktag 6.070 VS K-tag 7.003

Support unlimited tokens: ktag 6.070 itself without tokens limited; Ktag 7.003 main unit have renew button, can click this button unlimited add tokens.

Languages:

ktag k-suite 2.13 support English, Italian, German, French, Portuguese, Spanish.
k-tag KTM100 2.13 support English, Italian, Portuguese

Operation System: Better to Use Win XP

Support vehicles/ECU:

Ktag k-suite 2.13 FW 6.070 fit 2.10 software perfectly. Almost all ECUs and protocols are opened.

Ktag KTM100 2.13 FW 7.003  New adds BMW F chassis petrol and Mercedes-Benz W222. Suitable to more ECU types and protocols, support EDC17, MED17 and so on. Can programming ECU for Cars, Motorcyles and Trucks.

download + setup+ activation guide: Volvo PTT 2.03 software

New Volvo Diagnostics Premium Tech Tool software has released to V2.03. Volvo PTT 2.03 software is verified working, and working well on Volvo 88890300 Vocom interface, Here, vipprogrammer.com share the download link+ setup guide+ activation guide: Volvo PTT 2.03 software

Many people feedback, they are concerned about where to download Volvo  PPT 2.03, they also don't know how to install Volvo PPT 2.03 software on laptop, also have problem on activation. vipprogrammer.com engineer would like to answer these questions one by one in the following parts.

Where to download Volvo PPT Software 2.03?
Browse this link to download Volvo PPT 2.03 all files:
https://mega.co.nz/#F!MMEF0aRT!OcseZ1B70uYgbIOQYrr7VQ

Volvo TechTool 2.01 and Dev2Tools 2.0 keygen
http://www.vipprogrammer.com/volvo-techtool-201-and-dev2tools-20-keygen-programmer-1447

How to install and active Volvo PPT 2.03 software?
OS requirement: support Win 7 Professional or Ultratme
1. Copy all the downloaded files to usb-hard disk
2. Unzip “Acronis Boot 2014.part1.rar” (need winara 5.0 above version)
3. Burn “Acronis Boot 2014.iso” into CD disc
4.Unzip Tech Tool 2.03.85 (With APCI+ Update!)_Final.part01.rar, password:
E29A11A8EE81DD9D1606BD83BBA26559, will get Tech Tool 2.03.85 (With APCI+ Update!)_Final.tib
5. Insert acronic boot cd, boot laptop
6. Recovery -> choose Tech Tool 2.03.85 (With APCI+ Update!)_Final.tib-> recovery to laptop harddisk
7. Reboot PC , now you will get ptt2.03 with new win7 system , then go to  install driver
8. Copy “TechToolCoreDevelopmentContent.rar” and
“VCADSProDevelopmentContent.rar” to desktop
9. Send obd2express.co.uk teamviewer id password for activation.
More detailed pictures on PTT V2.03:

Review: china clone OPCOM firmware V1.59

New 1.59 FW OPcom scan tool is an professional PC based Opel diagnostics interface,Latest V1.59 Firmware OPcom OP-COm with pic18f458 chip, It's a China clone opcom cable. The original OP-COM is 640 pounds!!
Came with latest firmware V1.59 and a small CD. from vipprogrammer.com

Price: cheap 21 bucks free delivery
Remove the four screws on the OP-COM and unpack it, checked that all wiring connector inside soldered and soldering on the back side of the board without snot.

The biggest square chip in the center at the opcom USB interface – a controller PIC18F458 chip


Versions of the card should not exceed 5 – it can be seen from the inscription on it

The adapter itself has FTDI controller – it generates a code that identifies the communication between the adapter and the prog at the hardware level.
Op-com is connected to the diagnostic connector – if the well communication is built, the yellow indicator flashes, working.
Load it on a computer running Win XP 32 bit, run it as administrator (right click on the program icon and select the shield … Run as administrator). Software installation is 2 minutes’ work.
The clone opcom 1.59 comes with 2010.08(08/2010) software (same as opcom v1.45), rather then Russian or EU clone VAUX-COM 120309a.rar. Of course, English language only. Therefore, there is no way to update the firmware or software.


The biggest difference with opcom 1.49, opcom v1.35 is that it covers newer models. I went home and program new functions in BC of Vectra C 2014, OK. (Op-com v1.45 failed.) Other models not tested yet.

Step By Step Upgrade Process: Clone SDconnect c4 Multiplexer

here, we’d like to Share with  you: upgrade step of Clone SDconnect c4 Multiplexer, and guide your, How to Update Clone SDconnect c4 Multiplexer Step By Step, The kernel step is similar to a regular software update via the xentry das Diagnosis system,  from vipprogrammer.com

Step 1. Check battery if needed (only if related message is shown in the display)
When working on the vehicle or using an external power supply, the message “Batteries cannot be charged” may sometimes appear on the SDconnect display.
Note: The batteries had better be brand new to make sure of sufficient electricity.
Closing the Xentry Diagnostics/ Xentry DAS diagnostics application
When accessing a vehicle in Xentry Diagnostics or Xentry DAS, the following message appears

Exit the diagnostic application Xentry Diagnostics or Xentry DAS correctly to go on.
Step 2. Connecting the SDconnect to the Star Diagnosis system with the green cable
The SDconnect will be automatically selected and appear in the

Step 3. SDnetControl
Start SDnetControl by clicking the deskband
Go to the “Connections” tab.
Check whether automatic selection via the cable connection is active


Go to the “Configuration” tab, and confirm the warning with “Yes”

Step 4. Software update
Go to the “MUX” tab in SDnetControl.
Click on the “Software update” button.

The “SDconnect Toolkit Administration” program will start.
Go to the “Software update” tab in the SDconnect Toolkit.
Your SDconnect is already selected on the left-hand side.
Select the “Software update” packet under “Files for software update”.
Click “Start” to start the process.

The update process will start. This takes approx. 4 minutes.
Step 5. Completing the installation
Confirm the successful completion of the update.
After a successful update, a message indicating the successful update completion appears.
Confirm the message by clicking “OK”.

Update not successful
If the update was not successful, the message “The software update was aborted. Please repeat the update process” will appear.
Confirm this message by clicking “OK”. Check the SDconnect batteries if necessary and repeat the update process.

Go to the “Information” tab in SDconnect Toolkit
Select your SDconnect on the left-hand side.
Check the information under “Software versions” at the right:
The versions of the Linux OS and the CommandServer must be at least 2:0:xxxxxx.

The kernel update of the MB SD connect c4 is complete. The green cable can be removed.
That’s all for the steps, hope it would help you


before you start, make sure your xentry das program has been activated. To check if xentry das software has been activated, right-click on the xentry das icon and select Properties.