installation guide for ialtest Multi-Brand Diagnostics software

This article is an installation guide for ialtest Multi-Brand Diagnostics software on Windows 8 / Windows 7, it will help the customer install ialtest Multi-Brand Diagnostics software for use on a personal vehicle, Installation instruction and user manual of iatest Multi-Brand Diagnostics.

The ialtest Multi-Brand Diagnostics tool is the appropriate device to perform diagnosis on your truck. Multi-brand and multi-system diagnostics with a wide coverage on the different electronic systems installed on Commercial Vehicles.

Step 1: extracting compressed file on the disc to your computer's hard disk, extract password is” 12_1_JalTestSoft_Install_ENG_SPA”

Step 2: Double-click the file to install.

Step 3: Click on “Next”

Step 4: choose “i agree to ……”then click on “Next”.
 

Step 5: click on “Next”

Step 6: Only click on “Next”,nothing choose others.

Step 7: Only click on “Next”,nothing choose others.

Step 8: Only click on “Next”,nothing choose others.

Step 9: click here choose”JalTest Software for JalTest Link”.and you must connect USB to JalTest Link before you click the button. More importantly, the software only use on one computer,if you want to change another computer,you must active the software again. Jaltest-Link, JalTest software,and your computers are bound together, if you change anyone password to be re-activated.


Step 10: if you are sure all,click on“ACCEPT”. Before you click on ”ACCEPT”,you must sure something:1,you want has been using this computer,change computer will trouble you.2, Contact distributor, asked whether he would accept your password within 24 hours and then back to you the license code.3, Before you installed software, do not enter standby, Sleep, no power or shutdown state, the software has been running until you receive the license.
Step 11: wait a few minutes

Step 12:  Remember that you are buying the device's “PN””FW””SN”.click “ACCEPT” and press the button “GENERETE PASSWORD”.
Step 13: Sent your computer’s screen capture like the picture to your distributor to obtain a license code.
the button “GENERATE PASSWORD” can’t multiple clicks,it will lock the fireware ,and returned to the manufacturer for repair. If you do not get the license code within 24 hours, you have to unplug the JalTest-Link, then restart the computer, and contact your distributor again, then plug Jaltest-Link, re-install it again.
Step 14: Click”ACCEPT”,then click “VALID”

Step 15: Click “NEXT” and wait 15 minutes.

Step 16: press “finish”the soft icon in your PC desktop now.all setup is finished,you can use it test vehicle now.


Step 17: if you install “ialTest soft” twice,here will click “EXIT”


User manual of ialtest Multi-Brand Diagnostics:

http://www.slideshare.net/obd2motor/user-menuel-of-ialtest-jaltest-multi-brand-diagnostic-tool