BMW ICOM A2+B+C diagnostic & ECU programing tool with Wireless Router, support wifi function.
1. Equipped with WIFI Adapter and a Wireless Router, support wireless function.
2. Supports for a new Intel adapter function
3. Supports almost 95% laptop on the world with Intel chip( I3/I5/I7 series) and have 4GB memory, vipprogrammer.com offer ISTA-D and ISTA-P Software installed Lenovo E49 laptop or ThinkPad X201 Laptop or Dell E6420 Laptop, These Laptop is a Good Computer Configuration to Run ISTA/D ISTA/P program.
How to update chinese bmw icom firmware:
1 please use lan cable to connect Icom with your computer,please use 12V battery connect icom or you connect icom with car,start the car.
2 use IE open the http://169.254.92.38:60080/, id and password is : root, NZY11502
3 click : "Update Firmware", you will see the icom firmware version information
4 choose ICOM-BootImage-01-13-00.bin , set image type as system,click "send the file"
5 when it asks "Write the image file to the flash?", choose yes, then the icom lights will turn red.
6 when it asks "The SYSTEM IMAGE update was successfull ", click "Update Firmware"
7 choose ICOM-ApplicationImage-01-18-00.bin, set image type as APPLICATION, click "send the file"
it will take few mins,please wait it.
8 when it asks, "Write the image file to the flash?", click yes, icom light will turn red
9 please wait about 2-3 mins, when everything ok, click “reboot”
update tips: when you get update china clone BMW ICOM hardware,
1 you need get your computer IP automatically.
2 the update file has one small file, one bigger file.use the small file first, when you use small file, choose system, bigger file choose APPLICATION
BMW ICOM A / A2 Diagnostic Head Diagnostic ISTA/D and Programming ISTA/P
没有评论:
发表评论