upgrade guide of china clone BMW ICOM A / A2 firmware

if you bought China Clone ICOM A or ICOM A2 interface in chinese market,  how to update chinese BMW ICOM A / A2 firmware to latest version, and work on latest ISTA/D and ISTA/P software, Here, vipprogrammer.com share upgrade guide of china clone BMW ICOM A / A2 firmware, and 10 Steps upgrade Operation for Chinese BMW ICOM A / A2 firmware.



Where to download latest BMW ICOM A / A2 firmware file, and how to do the update on your BMW ICOM in chinese market. Is there any known FAQ in the web available or is this simple user guide?

1). Use your cable and connect BMW ICOM to port
2). Power ICOM by 12V power adapter or from 1x DLC
3). Use your browser (IE) and browse 169.254.92.38:60080/
User name: root
Password: NZY11502
4). Click "Update Firmware",and you can find the version of firmware.
5). Select ICOM-BootImage-XX-XX-XX.bin, set image type to "SYSTEM",
click "Send the file"
6). When it will say "Write the image file to the flash?", click "Yes",
then the ICOM led it will been RED
7). When it will say "The SYSTEM IMAGE update was successfull",
click "Update Firmware"
8). Select ICOM-ApplicationImage-XX-XX-XX.bin, set image type to "APPLICATION",
click "Send the file",the file is big so it will take some minutes to finish have patience.
9). When it will say "Write the image file to the flash?", click "Yes",
then the ICOM led it will been RED again
10). When it is ok, click "reboot".

ICOM-BootImage-01-20-00.bin
https://mega.co.nz/#F!OIQDBJTL!RpqnOiUVofxqueHVSzkc2g

How to update ICOM A or A2 firmware, pdf document free download:
http://pan.baidu.com/s/1i3rEfVv

BMW ICOM Firmware Update Files and Upgrade Operation Steps
http://www.chinaautodiag.com/html/bmw-icom-firmware-update-files-and-operation-steps-10498.html