Digiprog 3 Mileage programmer : GOOD/BAD Tested vehicle RESULTS

Chinese clone Digiprog 3 Mileage programmer GOOD / BAD Tested ECU RESULTS,  do you bought Clone Digiprog 3 Mileage programmer from china, and looking for the feedback on Digiprog 3 good / bad experiences that you may have had with the Clone Digiprog 3 mileage programmer, Here, vipprogrammer.com made this thread for sharing the tested ECUs with Clone Digiprog 3 by many real users, we collect the list in the reputable mhauto forum.

This is our customer share with us who bought a digiprog 3 from vipprogrammer.com, (Customer Share) Digiprog 3 tested and work on which models

here is the detail Test information:

1.Just done a Mercedes 204 and 212 diagnosis, mileage and assyst processing, the tool worked alright. The mileage correction just took less than 1 min.
2.Tested on Citroen c2, ok
Ford Galaxy 04 plate, ok
Ford Mondeo 04, ok
VW Golf MK 5 06, ok

3.I have tried and tested my DP3 (Digiprog 3) on Mercedes 204 212, worked great.

4.BMW E46 by 20 pin DLC work ok year 2000
Mercedes 2008 by OBD work, dash only!
Nissan Cascai 2008 by eeprom direct working

5.I did Mercedes Benz w204 2010, w212 2011. 2 min job done. Worked very good.
6.Tested on 211 2008 work with flashing option(block Syncro with EZS in dash flash)
7.2009 Insignia done today via OBD OK
2009 Audi R8 done OK
2009 Insignia done OK

8.Tested on VW Jetta 2007 and Chevrolet Malibu 2008, OK.
9.I only got the machine this week, the cars I have tried up to now have worked all the eeprom of Audi A4 09 diag, 2011 Ford Focus diag, Peugeot E7 BSI and dash, Fiat Doblo diag, Honda Accord, Peugeot 407 06, Peugeot 406 bsi and dash.
10.Audi a4 2008 …. by obd 30min job
Audi a6 2004…. not from first try but ok (q7 the same )
Audi a3 2003…. obd 1min job

Digiprog 3 tested and work on which models:

http://www.slideshare.net/obd2motor/digiprog-3-mileage-programmer-good-or-bad-tested-vehicle-results

how to install 2015.2 International ETKA 7.4 software

Multilanguage Volkswagen ETKA International for VW-SEAT-SKODA-AUDI, do you know how to 2015.2 International ETKA 7.4 software on pc, here, vipprogrammer.com supply the Instructions, guide you how to install and crack 2015.2 ETKA International ETKA 7.4 software,  and how to UPDATE DATABASE and UPDATE THE PRICELIST

Instructions:

1.- Uninstall any previous version of ETKA and reboots the system.

2.- Run ETKA International.exe and decompresses the content in C: \ (a folder called ETKA will be created).

3.- Install Hardlock.exe select language English.

4.- Run Emulator.exe, press the Install / Start Emulator button

5. Copy the shortcut ETKA 7.x 2014 on the desktop

6. Copy file LexHdl5.dll to C:\WINDOWS\system

7.- Run from the shortcut (running a Loader), select the 7.4 Версия icon button and two gear wheels to start the program.

8.- Changes the language of program, check min 1:45:

https://www.youtube.com/watch?v=I26qyxheEzI


TO UPDATE DATABASE:

Each time the program say that brand X expires in x days, you should upgrade to this:

1.- Disable any firewall that may prevent communication between the program and the server.

2.- Run from the shortcut (running a Loader), select the icon of a vehicle, press the Yes button, select the desired brand and click the bottom button (in Russian) for downloading updates.

3.- Run from the shortcut (running a Loader), select the 7.4 Версия button and two gear wheels icon to start the program and will ask if you want to install downloaded updates, select Yes, wait for it to finish.

4.- may need to reboot several times to apply all updates.


TO UPDATE THE PRICELIST:

1.- Disable any firewall that may prevent communication between the program and the server.

2.- Run from the shortcut (running a Loader), select the icon of price, select the desired brand and click the bottom button (in Russian) for downloading updates.

3.- Run from the shortcut (running a Loader), select the 7.4 Версия button and two wheels gear icon to start the program and will ask if you want to install downloaded updates, select Yes, wait for it to finish.

4. may need to reboot several times to apply all updates.

V1.1 VVDI PROG EEPROM, MCU and ECU Programmer

V1.1 VVDI PROG EEPROM, MCU and ECU Programmer,VVDI Prog programmer is the upgrade version of VVDI programmer, here, vipprogrammer.com share the post about V1.1 VVDI PROG programmer, this post consist of main unit picture, pcb board pictures, update history, main features, parts list, adapter description, supported chip list, etc.

Good news, new arrival VVDI-Prog V1.1 is tested working well, and VVDI PROG Auto ecu programmer is available at vipprogrammer.com, Xhorse VVDI Prog super programmer support almost auto EEPROM, MCU and ECU chips.




Introduction about VVDI Prog super programmer
Main Feature
1)The built-in update software allows user to update VVDIProg firmware timely.
2)High-speed USB communication interface enable the software automatically connect.
3)Smart operation mode: the possible causes of error will be listed
4)Reserve ports: for future update.
5)The self-test function enable you check if the machine works well.
6)Can supply power via USB cable, the software will automatically prompt if the external USB power supply is needed.



VVDI Prog Supported chip list on EEPROM, MCU and ECU




ECU list:



3 Adapters Detailed Description

 16pin locking socket
Read the common EEPROOM, note: please insert the chip by following the below picture.

MCU Reflash cable
Used to program MCU on board



ECU Reflash cable
Used to program ECU


VVDI Prog super programmer package List

New Arrival Nitroobd2 Chip Tuning Box NitroOBD2 Benzine Diesel

vipprogrammer.com new arrival Plug and Drive NitroOBD2 Performance Chip Tuning Box. NitroOBD2 Diesel works based OBD2 protocols as remaping the Car's computer ECU. NitroOBD2 Diesel Nitro obd2 Chip Tuning Box is specially made for Diesel cars from the year of 1996. Now vipprogrammer.com have NitroOBD2 Diesel and NitroOBD2 Benzine Chip Tuning Box for sale.

NitroOBD2 Diesel Nitro obd2 Chip Tuning Box Nitro OBD2 Diesel

 
What is NitroOBD2 Chip Tuning Box?

NitroOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance of your car.

When it plugged into OBD2 connector, NitroOBD2 receives the information from the car computer ECU. With the received data from ECU, NitroOBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to increase the performance of your car.

NitroOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine.

NitroOBD2 finds out the hidden power of your car. NitroOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting.

NitroOBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug NitroOBD2 from OBD2 connector.

What does NitroOBD2 make?

According to your driving habits,  NitroOBD2 makes new map in the car's computer ECU to increase the performance of your car. As you driving much more KM/Mile, it renews the map. Thus it keeps the vehicle's power and torque increasing.

Ktag KTM100 2.13 software: e000079 customer code invalid

KTAG KTM100 software is the latest software for clone K-tag ECU programmer, it is the latest developed ECU programmer. Which software is 2.13 KTM100 version, Firmware is V7.003 version.

Compared with older chinese clone K-TAG and KESS V2. 7.003 Ktag has the following advantages:

1) KTM100 software support recognize the ECU detailed type via ID automatically

2) Add more ECU models than other KSUITE version

3) ALL vehicles are shown on the same list, it is very easy for you to check the list. and so on.

Recent days, vipprogrammer.com some customer install the KTM100 software ready, then get prompt like: “interface connected. Error: [e000079] customer code invalid.”



When you see this, please check these first:
1) GO to device manager to check if driver installed ready, see driver or not.
2) Internet is turned off. No anti-virus installed.
3) KTM100 connect with power adapter.

After check all things without problem. Disassemble the cover, you will find the TF card, insert the TF card to main unit again, to make sure TF card communicate the main unit successfully. Then problem will be solved.


More information: http://www.vipprogrammer.com

how to Read & Write BMW M35080 chip by R270 BDM programmer

R270 BDM Programmer is auto ecu programmer for BMW CAS4, BMW R270 BDM programmer is able to read and write BMW ECU chip data quickly and safely. Here, vipprogrammer.com collect the operation guide of reading & writing BMW M35080 chip by with china clone R270+ BDM programmer.

How-to:
Select correct MCU “D80 D0WQ/”
Select “M35080/160D” button on the left
Select IC Type “D80 D0WQ/” and DAS Odometer Type “Type 1”

Click “Read” button
Waiting Decode, need 1-3 minutes


Save dump file

The R270 Pro will display the odometer, click “Erase Odometer” button

Again wait decode, need 1-3 minutes
Save bin file
Erase eeprom

Write success

Odometer has been erased.

NOTE:
If you fail to use R270 to work with M35080 eeprom, firstly you have to remove M35080 chip and then plug it into the IC socket, this IC socket is designed for M35080 eeprom.

How to make R270 better on M35080?
Replace the resistor R11 by 200-1K resistor.

Some other tested ECUs:
BMW CAS and CAS4 (0K50E/2K79X/0L01Y/0L15Y/1L15Y, etc.)
Benz EZS
Read BMW EWS4 (2L86D)

A variety of SRS modules:(9H91F/0K13J/0K75F/0L85D/0J38M/1E62H/1K7 9X/5H55W, etc.)
All EIS/CAS/SRS/ECU automotive modules

user manual of R270+ BMW BDM Programmer

V1.20 R270 programmer software installation and setup video:

https://www.youtube.com/watch?v=NR15QSeuOVo

R270 in circuit programmer operation video instructions

https://www.youtube.com/watch?v=ucnf2xIKO0U

Difference between Mb star C3 and SDconnect C4 Multiplexer

As we all know, right now the best Dealer Level Automotive Diagnostic Scan Tool for Mercedes-Benz is SDconnect C4 Multiplexer, why choose Sdconnect C4 replace old Mb star C3, what is the Difference between Mb star C3 and SDconnect Compact 4 from vipprogrammer.com

SDconnect C4 supports Wireless Diagnosis
SDconnect C4 supports not only KL diagnosis and three lines CAN BUS diagnosis, but also UDS diagnostic protocol. Because the board of Mb star Compact 3 doesn’t contain UDS protocol chip, the hardware will be eliminated directly.
SDconnect C4 can do wireless diagnosis. Besides, it uses LAN cable connection. So it can support more computer model.
Interface components used the military quickly inserted techniques that can support one million times plug, more stable.
All of the core components adopt new original packaged chip, plus 24 hours fatigue test, to ensure product stable release.

Buy chinese clone SDconnect C4 Multiplexer for 6 reasons from vipprogrammer.com

1 Newest Version:  2015.07
   Hardware version: OS:2.3   CSD:2.8
2 Full scan and coding tool for BENZ from 1989-2015.
3 WIFI or lan cable connection,more easy to use!No need COM port computer.
4 Multi-language:
Bulgarian/Danish/Greek/Spanish/French/Italian/Korean/Polish/Romanuan/Serbo-Croatian/
Turkish/Czech/German/English/Finish/Hyngarian/Japanese/Dutch/Japanese/Dutch/Portuguese/Russian/Swedish/Chinsee

5 Update by Newer version HDD.

6 Support Vediamo V5.00.05 Software,we send you free in this package.