Ktag KTM100 2.13 software: e000079 customer code invalid

KTAG KTM100 software is the latest software for clone K-tag ECU programmer, it is the latest developed ECU programmer. Which software is 2.13 KTM100 version, Firmware is V7.003 version.

Compared with older chinese clone K-TAG and KESS V2. 7.003 Ktag has the following advantages:

1) KTM100 software support recognize the ECU detailed type via ID automatically

2) Add more ECU models than other KSUITE version

3) ALL vehicles are shown on the same list, it is very easy for you to check the list. and so on.

Recent days, vipprogrammer.com some customer install the KTM100 software ready, then get prompt like: “interface connected. Error: [e000079] customer code invalid.”



When you see this, please check these first:
1) GO to device manager to check if driver installed ready, see driver or not.
2) Internet is turned off. No anti-virus installed.
3) KTM100 connect with power adapter.

After check all things without problem. Disassemble the cover, you will find the TF card, insert the TF card to main unit again, to make sure TF card communicate the main unit successfully. Then problem will be solved.


More information: http://www.vipprogrammer.com