user manual of self learning wireless remote control

self learning wireless remote control is Mutual Copying wireless key remote controller, it is Pair Duplicating electrical rf remote control Duplicator, do you know how to self-learning rf Remote controller, it is suitable for all fixed code chip key Remote control, 433.92MHz or 315MHz optional

here, vipprogrammer share the user manual of self learning wireless remote control, and make the operation guide for Mutual Duplicating(Self-Learning) Remote Control, share the operation video demo of self learning wireless remote control.
http://www.vipprogrammer.com/pairduplicating-wireless-remote-control-fixed-code-programmer-1040

PS: for the button “A B C D” is equivalent to “1 2 3 4”

       

1. Code Clear

It’s necessary to clear the original codes of the copy code remote control. Press and hold the “arming” button and “disarming” button simutaneously for 2 seconds till the LED indicator flashes 3 times. Keep pressing the “arming” button and release the “disarming” button, then press the “disarming” button for 3 times within 5 seconds. The LED indicator slowly flashes 3 times then becomes fast flash to indicate the code clear is finished

2. Code Copy

With the original remote control on your one hand, with the copy code remote control on the other hand, approach the two remote controls to each other as close as possible. Press and hold the button to be learned on the original remote control and the button you want to learn on the copy code remote control simutaneously for 3 seconds, the LED indicator flashes 3 times then becomes fast flash, indicating the code is learned/copied successfully. Repeat the above steps to copy the code of other buttons

3. Code Retrive

In case if you lost the codes you are using by accident, don’t worry you can retrive them by following the step below: press and hold the “starting” button and “muting” button simutaneously for 3 seconds, the LED indicator flashes 3 times then becomes fast flash, indicating the codes are retrived now.

4. Frequency Adjustment 

For fixed frequency copy, you can directly copy the code from other RF remote control. If not, if need to open the cover of the copy remote control and adjust the frequency with the great sense to meet the frequency of original remote control.  For example, the frequency of the copy remote is 315MHz, but the original remote is 433MHz, you need to adjust the frequency of the copy remote from 315MHz to 433MHz.